Description
Commercial grade zero-turn in a value package.
20 hp Kawasaki® V-Twin engine
48" full-floating
UltraCut™ Series 4 cutting decks
Exmark® exclusive Parker unitized
12 cc pump and wheel motor
system with no hoses
Heavy-duty canister air filtration
system
High-capacity 8-gallon, single fuel
tank with single fill location
Specifications:
Engine: 20 hp Kawasaki V-Twin, governed to 3,750 rpm
Air Filter: Heavy-duty canister air cleaner
Drive System: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart
integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed: Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.5 mph (7.2 kmph) reverse
PTO Engagement: MagStop Electromagnetic 175 ft-lbs clutch with spot brake
Fuel Capacity: 8-gallon, single fuel tank with single fill location
Drive-Wheel Release: Allows unit movement without engine running
Safety Package: Operator Presence Controls (OPC) and drive system interlock
Rollover Protection System: 2-post foldable ROPS standard with seat belt and latch
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around
obstacles, or place in transport position
Casters: 0.50 thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups
Cup Holder: Standard
Style: Full-floating UltraCut Series 4. Side discharge standard with the option to bag or mulch
Cutting Width: 48" 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt with wide-flange cutter housings. 4-point suspension, full-floating deck with 3 adjustable, anti-scalp
rollers
Cutting Height: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat
Blade Tip Speed: Approximately 18,500 fpm
Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel
Steering and Motion Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to
customize drive responsiveness. Levers are also adjustable to 2-height positions
Front Caster Tires: 12 x 5.0-6, smooth-tread, pneumatic front caster tires
Drive Tires: 22 x 9.5-12 Turf Master drive tires
Turning Radius: True zero-turn
Parking Brake: Lever-actuated disc and caliper
Seat: Exmark premium two-color seat with adjustment fore and aft
Diagnostics: Operational diagnostics with integral fuel gauge
Blade Spindles: No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with
1.0"-diameter spindle shaft and hex blade driver can handle tough mowing conditions
Battery: 12-volt battery with 15-amp alternator
Engine Hourmeter: Standard
