Description
SaltDogg Electric Drive Hopper Spreaders
The SaltDogg electric-drive spreaders are powered by 12-volt direct drive gear motors, and are available from 3/4 yard to 6 yard capacity.
The SHPE series SaltDogg® spreaders are completely self-contained, ultra–durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on utility vehicles, pickups, dump, platform and utility trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
Material Hopper – Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. (Molded fork slots in hoppers makes for easy one man installation & removal, requires extended fork, or lift from 4-point tie downs.)
Auger – 2.5" dia. screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
Material Flow/Output – Salt, 2.2 cu. ft./minute; Salt/Sand, 1.3 cu. ft./minute. Spread width is variable from 5 to 38 feet.
Spinner Chute Assembly – A 11.5" polymer disc is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty polymer chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the vehicle and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5' to 30'. A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage.
Electric Motors – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with two independently powered vibrators. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50°C to -105°C). An in-cab console features independent controls for the auger, spinner and vibrator.
Standard Equipment – 1/4" black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 of force pounds for maximum performance. Spreader hold-down kit.
Ideal Use: Medium & Heavy Duty Commercial
Construction: Polyethylene
Capacity: 1.45 cu. yds.
Dimensions: 87.5" x 51" x 38"
Weight: 520 lbs
Feed Mechanism: Screw-Type Auger
Motor: (2) 12-volt DC
Spinner: 11.5" Poly
Spread Width: 5-30 feet
Chute: Standard
Control: In-cab Console
Vehicle Applications: 3/4 & 1 ton Trucks (Above 8500 lbs GVWR)
